Power
Output -
2:1 VSWR, all phase angles: 100W (+50 dBm),+/- 1 dB, adjustable
in 1 dB increments from 10W to 100W, SATCOM Band |
Frequency
Range -
243 to 270 MHz (SATCOM Band) (Receive)
291 to 318 MHz (SATCOM Band)
(Transmit) |
Altitude:
-
15,000 ft. (Operating)
30,000 ft. (Non-Operating) |
Size and Weight-
PA/Pre-amp: 4.5" W x 5.5" H x 12" D, 12.2
lbs.
AC/DC Power Supply: 8" W x 2.6" H x 11"
D, 4.5 lbs. TBD
Remote Control Unit: 3.6" W x 5" H x 2.8"
D, 1.75 lbs. |
| View
all technical specs ... |
|
| 100W SATCOM
Transportable Amp |
Item:
P/N 25000-1 |
This
case-transportable system provides 100 watts of RF output
power into a 2:1 VSWR load under all temperature and load
conditions at 100% duty cycle. It also amplifies RF signals
from a satellite antenna in the receive direction (LOS
antenna signals are passed through un-amplified). It is
completely self-contained, with internal transmit/receive
switch, DC/DC power supply, and automatic/manual LOS Bypass
mode. The PA/pre-amplifier is remotable up to 300 feet,
via a single coaxial connection. The system accommodates
all PSK/FSK modulation techniques and TDMA/DAMA formats
as provided by any DAMA terminal meeting the input frequency
and power range requirements, in accordance with JITC
standards.
The Remote Control Unit allows operator control of output
power levels; receive power levels, SATCOM/LOS control;
and displays RCU and amplifier status and operating time.
It can be powered by either a +28 VDC MIL-STD-1275A or
110/220 VAC universal power source. |
| Place
an Order Inquiry |
|
