DMR 100 Watt Power Amplifier

P/N 27000-5

Milpower is delivering a new 100 Watt version of the DMR Power Amplifier. The new Digital Modular Radio 100 Watt Power Amplifier features the required fast- switching filtering (<20usec), transmit/receive switching, and full 100 watt performance into a 2.0:1 VSWR load under all temperatures and load conditions at 100% duty cycle, over the full 30-512 MHz band.

The 19" rack-mounted digital modular radio power amplifier is completely self-contained, with internal fans, transmit/receive switch for full-duplex operations and internal single phase, 115 VAC, 45-420 Hz power supply with active power factor correction. Automatic level control is provided for inputs ranging from -20 to +15 dBm, and provides unconditional stability and protection for all load conditions. It can be operated in AM, FM, PM, pulsed or continuous wave, and single and multi-tone modes.

Please call (858) 569-6740 or (619) 892-4545 for more information on our Digital Modular Radio 100 Watt Power Amplifier.

Power Output:

100 watts (+50 dBm)

Frequency Range:

30-512 MHz

Input Power:

-20 dBm to 15 dBm

RF Gain Control:

1 dB steps Input range -20 to +15 dBm.
Output range +43 dBm (20 watts) to +50 dBm (100 watts)

Control Interface:

DMR Control Interface, Discrete

Prime Power:

103-126 VAC, 45-420 Hz, single Phase per MIL-STD-1300

Size and Weight:

19" W x 3.5" H x 20.5" D, 48 lbs.

Acoustic Noise:

< 62 dB @3 feet

Shock:

MIL-STD-901D operating: +/- 15 g, 11mSec; non-operating: +/- 30 g

Vibration:

MIL-STD-167-1 Type 1

Temperature:

Operating: 0° C to + 50° C; non-operating: -40° C to +70° C

Altitude:

Operating: 10,000 feet; non-operating: 15,000 feet

Humidity:

95%, non-condensing

EMI/EMC:

MIL-STD-461C

MTBF:

>16000 hours